R3303-HP HSR6800 Routers IP Multicast Command Reference

73
Field Descri
p
tion
Flag
IGMP route flags:
• ACT—IGMP routing entries that have been used for
forwarding data packets but have the multicast group
address out of the SSM group range.
• SUC—IGMP routing entries that have been added to the
forwarding table and have the multicast group address
within the SSM group range.
List of 1 downstream interface
Downstream interface list: list of interfaces to which
multicast data for this group is forwarded.
in include mode The downstream interface is in include mode.
in exclude mode The downstream interface is in exclude mode.
Downstream interface is none No downstream interfaces exist.
Protocol Protocol type.
display igmp ssm-mapping
Use display igmp ssm-mapping to display the configured IGMP SSM mappings for the specified
multicast group.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] ssm-mapping group-address [ | { begin
| exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If neither all-instance nor vpn-instance is specified, this command displays the information on the public
network.