R3303-HP HSR6800 Routers IP Multicast Command Reference

74
Examples
# Display the IGMP SSM mappings for multicast group 232.1.1.1 on the public network.
<Sysname> display igmp ssm-mapping 232.1.1.1
VPN-Instance: public net
Group: 232.1.1.1
Source list:
1.2.3.4
5.5.5.5
10.1.1.1
100.1.1.10
Table 21 Command output
Field Descri
p
tion
VPN-Instance: public net Public network.
Group Multicast group address.
Source list List of multicast source addresses.
Related commands
ssm-mapping
display igmp ssm-mapping group
Use display igmp ssm-mapping group to display the multicast group information created based on the
configured IGMP SSM mappings.
Syntax
display igmp [ all-instance | vpn-instance vpn-instance-name ] ssm-mapping group [ group-address |
interface interface-type interface-number ] [ verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
all-instance: Specifies all MPLS L3VPNs.
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN by its name, a case-sensitive string of 1 to 31
characters.
group-address: Specifies a multicast group address in the range of 224.0.1.0 to 239.255.255.255. If you
do not specify any multicast group, the command displays the information of all multicast groups created
based on the configured IGMP SSM mappings.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify any interface, the command displays the multicast group information created based on the
configured IGMP SSM mappings on all the interfaces.