R3303-HP HSR6800 Routers IP Multicast Configuration Guide

151
Use the display pim interface command to display PIM information on each interface. For
example:
# Display PIM information on Router A.
[RouterA] display pim interface
VPN-Instance: public net
Interface NbrCnt HelloInt DR-Pri DR-Address
GE2/1/0 0 30 1 10.110.1.1 (local)
GE2/1/3 1 30 1 192.168.1.2
GE2/1/1 1 30 1 192.168.9.2
# Display information about the BSR and locally configured C-RP on Router A.
[RouterA] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:40:40
Expires: 00:01:42
# Display information about the BSR and locally configured C-RP on Router D.
[RouterD] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Accept Preferred
Scope: Not scoped
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 192.168.4.2
Priority: 10
Hash mask length: 32
State: Candidate
Scope: Not scoped
Candidate RP: 192.168.4.2(GE2/1/1)
Priority: 192
HoldTime: 150
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:34
# Display information about the BSR and locally configured C-RP on Router E.
[RouterE] display pim bsr-info
VPN-Instance: public net
Elected BSR Address: 192.168.9.2
Priority: 20
Hash mask length: 32
State: Elected
Scope: Not scoped