R3303-HP HSR6800 Routers IP Multicast Configuration Guide

161
[RouterA] interface GigabitEthernet 2/1/1
[RouterA-GigabitEthernet2/1/1] pim sm
[RouterA-GigabitEthernet2/1/1] quit
[RouterA] interface serial 3/1/1
[RouterA-Serial3/1/1] pim sm
[RouterA-Serial3/1/1] quit
[RouterA] pim
[RouterA-pim] bidir-pim enable
[RouterA-pim] quit
# On Router B, enable IP multicast routing, enable PIM-SM on each interface, enable IGMP on
interface GigabitEthernet 2/1/1, and enable BIDIR-PIM.
<RouterB> system-view
[RouterB] multicast routing-enable
[RouterB] interface GigabitEthernet 2/1/1
[RouterB- GigabitEthernet2/1/1] igmp enable
[RouterB- GigabitEthernet2/1/1] pim sm
[RouterB- GigabitEthernet2/1/1] quit
[RouterB] interface serial 3/1/1
[RouterB-Serial3/1/1] pim sm
[RouterB-Serial3/1/1] quit
[RouterB] interface serial 3/1/2
[RouterB-Serial3/1/2] pim sm
[RouterB-Serial3/1/2] quit
[RouterB] pim
[RouterB-pim] bidir-pim enable
[RouterB-pim] quit
# On Router C, enable IP multicast routing, enable PIM-SM on each interface, and enable
BIDIR-PIM.
<RouterC> system-view
[RouterC] multicast routing-enable
[RouterC] interface serial 3/1/1
[RouterC-Serial3/1/1] pim sm
[RouterC-Serial3/1/1] quit
[RouterC] interface serial 3/1/2
[RouterC-Serial3/1/2] pim sm
[RouterC-Serial3/1/2] quit
[RouterC] interface loopback 0
[RouterC-LoopBack0] pim sm
[RouterC-LoopBack0] quit
[RouterC] pim
[RouterC-pim] bidir-pim enable
# On Router D, enable IP multicast routing, enable PIM-SM on each interface, enable IGMP on
interface GigabitEthernet 2/1/1, and enable BIDIR-PIM.
<RouterD> system-view
[RouterD] multicast routing-enable
[RouterD] interface GigabitEthernet 2/1/1
[RouterD-GigabitEthernet2/1/1] igmp enable
[RouterD-GigabitEthernet2/1/1] pim sm