R3303-HP HSR6800 Routers IP Multicast Configuration Guide

7
Address Description
224.0.0.11 Mobile agents.
224.0.0.12 DHCP server/relay agent.
224.0.0.13 All PIM routers.
224.0.0.14 RSVP encapsulation.
224.0.0.15 All CBT routers.
224.0.0.16 SBM.
224.0.0.17 All SBMs.
224.0.0.18 VRRP.
IPv6 multicast addresses
Figure 4 IPv6 multicast format
The following describes the fields of an IPv6 multicast address, as shown in Figure 4:
{ 0xFF—The most significant eight bits are 11111111, which indicates that this address is an IPv6
multicast address.
{ Flags—The Flags field contains four bits, as shown in Figure 5 and described in Table 4.
Figure 5 Flags field format
Table 4 Flags field description
Bit Descri
p
tion
0 Reserved, set to 0.
R
When set to 0, this address is an IPv6 multicast address without an
embedded RP address.
When set to 1, this address is an IPv6 multicast address with an
embedded RP address (the P and T bits must also be set to 1).
P
When set to 0, this address is an IPv6 multicast address not based on
a unicast prefix.
When set to 1, this address is an IPv6 multicast address based on a
unicast prefix (the T bit must also be set to 1).
T
When set to 0, this address is an IPv6 multicast address
permanently-assigned by IANA.
When set to 1, this address is a transient, or dynamically assigned
IPv6 multicast address.