R3303-HP HSR6800 Routers IP Multicast Configuration Guide

206
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP address
family view.
ipv4-family multicast N/A
4. Advertise a default route to an
MBGP peer or peer group.
peer { group-name | ip-address }
default-route-advertise
[ route-policy route-policy-name ]
Not advertised by default.
NOTE:
A
fter you confi
g
ure the peer default-route-advertise command, the router sends a default route with the
next hop as itself to the specified MBGP peer or peer group, whether the default route is available or no
t
in the routing table.
Configuring outbound MBGP route filtering
If several filtering policies are configured, they are applied in the following sequence:
• filter-policy export
• peer filter-policy export
• peer as-path-acl export
• peer ip-prefix export
• peer route-policy export
Only the routes that have passed all the configured policies can be advertised.
To configure BGP route distribution filtering policies:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP
address family view.
ipv4-family multicast N/A