R3303-HP HSR6800 Routers IP Multicast Configuration Guide

208
Ste
p
Command Remarks
4. Configure MBGP route
reception filtering policies.
• Filter incoming routes using an ACL or
IP prefix list:
filter-policy { acl-number | ip-prefix
ip-prefix-name } import
• Reference a routing policy to routes
from an IPv4 MBGP peer or a peer
group:
peer { group-name | ip-address }
route-policy policy-name import
• Reference an ACL to filter routing
information from an IPv4 MBGP peer
or a peer group:
peer { group-name | ip-address }
filter-policy acl-number import
• Reference an AS path ACL to filter
routing information from an IPv4
MBGP peer or a peer group:
peer { group-name | ip-address }
as-path-acl as-path-acl-number import
• Reference an IP prefix list to filter
routing information from an IPv4
MBGP peer or a peer group:
peer { group-name | ip-address }
ip-prefix ip-prefix-name import
Configure at least one
command.
No inbound route filtering is
configured by default.
5. Specify the maximum
number of routes that can be
received from an IPv4 MBGP
peer or a peer group.
peer { group-name | ip-address }
route-limit limit [ percentage ]
Optional.
The number is unlimited by
default.
NOTE:
Members of a peer group can have different route reception filtering policies from the peer group.
Configuring MBGP route dampening
By configuring MBGP route dampening, you can suppress unstable routes from being added to the
MBGP routing table or being advertised to MBGP peers.
To configure BGP route dampening:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enter BGP view.
bgp as-number N/A
3. Enter IPv4 MBGP address
family view.
ipv4-family multicast N/A