R3303-HP HSR6800 Routers IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis

220

[RouterC] interface serial 3/1/0

[RouterC-Serial3/1/0] pim sm

[RouterC-Serial3/1/0] quit

[RouterC] interface serial 3/1/1

[RouterC-Serial3/1/1] pim sm

[RouterC-Serial3/1/1] quit

[RouterC] interface gigabitethernet 2/1/1

[RouterC-GigabitEthernet2/1/1] pim sm

[RouterC-GigabitEthernet2/1/1] igmp enable

[RouterC-GigabitEthernet2/1/1] quit

# Configure a PIM domain border on Router A.

[RouterA] interface pos 5/1/0

[RouterA-Pos5/1/0] pim bsr-boundary

[RouterA-Pos5/1/0] quit

# Configure a PIM domain border on Router B.

[RouterB] interface pos 5/1/0

[RouterB-Pos5/1/0] pim bsr-boundary

[RouterB-Pos5/1/0] quit

4. Configure C-BSRs and C-RPs:

# Configure the C-BSR and C-RP on Router A.

[RouterA] interface loopback 0

[RouterA-LoopBack0] ip address 1.1.1.1 32

[RouterA-LoopBack0] pim sm

[RouterA-LoopBack0] quit

[RouterA] pim

[RouterA-pim] c-bsr loopback 0

[RouterA-pim] c-rp loopback 0

[RouterA-pim] quit

# Configure the C-BSR and C-RP on Router B.

[RouterB] interface loopback 0

[RouterB-LoopBack0] ip address 2.2.2.2 32

[RouterB-LoopBack0] pim sm

[RouterB-LoopBack0] quit

[RouterB] pim

[RouterB-pim] c-bsr loopback 0

[RouterB-pim] c-rp loopback 0

[RouterB-pim] quit

5. Configure BGP, specify the MBGP peer and enable direct route redistribution:

# On Router A, configure the MBGP peer and enable direct route redistribution.

[RouterA] bgp 100

[RouterA-bgp] router-id 1.1.1.1

[RouterA-bgp] peer 192.168.1.2 as-number 200

[RouterA-bgp] import-route direct

[RouterA-bgp] ipv4-family multicast

[RouterA-bgp-af-mul] peer 192.168.1.2 enable

[RouterA-bgp-af-mul] import-route direct

[RouterA-bgp-af-mul] quit