R3303-HP HSR6800 Routers IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis

261

262

263

264

265

266

267

268

269

270

255

[CEa1] interface gigabitethernet 2/1/1

[CEa1-GigabitEthernet2/1/1] ip address 10.110.7.1 24

[CEa1-GigabitEthernet2/1/1] pim sm

[CEa1-GigabitEthernet2/1/1] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/2.

[CEa1] interface gigabitethernet 2/1/2

[CEa1-GigabitEthernet2/1/2] ip address 10.110.2.2 24

[CEa1-GigabitEthernet2/1/2] pim sm

[CEa1-GigabitEthernet2/1/2] quit

# Configure RIP.

[CEa1] rip 2

[CEa1-rip-2] network 10.0.0.0

6. Configure CE b1:

# Enable IP multicast routing.

<CEb1> system-view

[CEb1] multicast routing-enable

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/1.

[CEb1] interface gigabitethernet 2/1/1

[CEb1-GigabitEthernet2/1/1] ip address 10.110.8.1 24

[CEb1-GigabitEthernet2/1/1] pim sm

[CEb1-GigabitEthernet2/1/1] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/2.

[CEb1] interface gigabitethernet 2/1/2

[CEb1-GigabitEthernet2/1/2] ip address 10.110.3.2 24

[CEb1-GigabitEthernet2/1/2] pim sm

[CEb1-GigabitEthernet2/1/2] quit

# Configure RIP.

[CEb1] rip 3

[CEb1-rip-3] network 10.0.0.0

7. Configure CE a2:

# Enable IP multicast routing.

<CEa2> system-view

[CEa2] multicast routing-enable

# Configure an IP address, and enable IGMP and PIM-SM on GigabitEthernet 2/1/1.

[CEa2] interface gigabitethernet 2/1/1

[CEa2-GigabitEthernet2/1/1] ip address 10.110.9.1 24

[CEa2-GigabitEthernet2/1/1] igmp enable

[CEa2-GigabitEthernet2/1/1] pim sm

[CEa2-GigabitEthernet2/1/1] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/2.

[CEa2] interface gigabitethernet 2/1/2

[CEa2-GigabitEthernet2/1/2] ip address 10.110.4.2 24

[CEa2-GigabitEthernet2/1/2] pim sm

[CEa2-GigabitEthernet2/1/2] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/3.

[CEa2] interface gigabitethernet 2/1/3