R3303-HP HSR6800 Routers IP Multicast Configuration Guide

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis

261

262

263

264

265

266

267

268

269

270

256

[CEa2-GigabitEthernet2/1/3] ip address 10.110.12.1 24

[CEa2-GigabitEthernet2/1/3] pim sm

[CEa2-GigabitEthernet2/1/3] quit

# Configure an IP address for Loopback 1 and enable PIM-SM on the interface.

[CEa2] interface loopback 1

[CEa2-LoopBack1] ip address 22.22.22.22 32

[CEa2-LoopBack1] pim sm

[CEa2-LoopBack1] quit

# Configure Loopback 1 as a BSR and RP for VPN a.

[CEa2] pim

[CEa2-pim] c-bsr loopback 1

[CEa2-pim] c-rp loopback 1

[CEa2-pim] quit

# Configure RIP.

[CEa2] rip 2

[CEa2-rip-2] network 10.0.0.0

[CEa2-rip-2] network 22.0.0.0

8. Configure CE a3:

# Enable IP multicast routing.

<CEa3> system-view

[CEa3] multicast routing-enable

# Configure an IP address, and enable IGMP and PIM-SM on GigabitEthernet 2/1/1.

[CEa3] interface gigabitethernet 2/1/1

[CEa3-GigabitEthernet2/1/1] ip address 10.110.10.1 24

[CEa3-GigabitEthernet2/1/1] igmp enable

[CEa3-GigabitEthernet2/1/1] pim sm

[CEa3-GigabitEthernet2/1/1] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/2.

[CEa3] interface gigabitethernet 2/1/2

[CEa3-GigabitEthernet2/1/2] ip address 10.110.5.2 24

[CEa3-GigabitEthernet2/1/2] pim sm

[CEa3-GigabitEthernet2/1/2] quit

# Configure an IP address and enable PIM-SM on GigabitEthernet 2/1/3.

[CEa3] interface gigabitethernet 2/1/3

[CEa3-GigabitEthernet2/1/3] ip address 10.110.12.2 24

[CEa3-GigabitEthernet2/1/3] pim sm

[CEa3-GigabitEthernet2/1/3] quit

# Configure RIP.

[CEa3] rip 2

[CEa3-rip-2] network 10.0.0.0

9. Configure CE b2:

# Enable IP multicast routing.

<CEb2> system-view

[CEb2] multicast routing-enable

# Configure an IP address, and enable IGMP and PIM-SM on GigabitEthernet 2/1/1.

[CEb2] interface gigabitethernet 2/1/1