R3303-HP HSR6800 Routers IP Multicast Configuration Guide

362
Total number of downstreams: 3
1: Serial3/1/0
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
2: Pos5/1/0
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
3: Pos5/1/1
Protocol: pim-dm, UpTime: 00:02:19, Expires: never
IPv6 PIM-SM non-scoped zone configuration example
Network requirements
The receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM
domain operates in the sparse mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
Both POS 5/1/0 on Router D and POS 5/1/2 on Router E act as C-BSRs and C-RPs. The C-BSR on Router
E has a higher priority. The range of IPv6 multicast groups served by the C-RP is FF0E::101/64. Modify
the hash mask length to map a certain number of consecutive IPv6 multicast group addresses within the
range to the two C-RPs.
MLDv1 runs between Router A and N1 and between Router B, Router C, and N2.
Figure 102 Network diagram
Device Interface IPv6 address Device Interface IPv6 address
Router A GE2/1/1 1001::1/64 Router D GE2/1/1 4001::1/64
S3/1
/
0 1002::1/64 S3/1
/
0 1002::2/64
POS5/1/0 1003::1/64 POS5/1/0 4002::1/64
Ethernet
EthernetEthernet
N1N2
S3/
1/0
S3/1/0