R3303-HP HSR6800 Routers IP Multicast Configuration Guide

364
[RouterE] pim ipv6
[RouterE-pim6] c-bsr 1003::2 128 20
[RouterE-pim6] c-rp 1003::2 group-policy 2005
[RouterE-pim6] quit
5. Verify the configuration:
Use the display pim ipv6 interface command to display IPv6 PIM information on each interface.
For example:
# Display IPv6 PIM information on Router A.
[RouterA] display pim ipv6 interface
Interface NbrCnt HelloInt DR-Pri DR-Address
GE2/1/1 0 30 1 1001::1
(local)
Ser3/1/0 1 30 1 1002::2
Pos5/1/0 1 30 1 1003::2
# Display information about the BSR and locally configured C-RP on Router A.
[RouterA] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Accept Preferred
Uptime: 00:04:22
Expires: 00:01:46
# Display information about the BSR and locally configured C-RP on Router D.
[RouterD] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:05:26
Expires: 00:01:45
Candidate BSR Address: 4002::1
Priority: 10
Hash mask length: 128
State: Candidate
Candidate RP: 4002::1(Pos5/1/0)
Priority: 192
HoldTime: 130
Advertisement Interval: 60
Next advertisement scheduled at: 00:00:48
# Display information about the BSR and locally configured C-RP on Router E.
[RouterE] display pim ipv6 bsr-info
Elected BSR Address: 1003::2
Priority: 20
Hash mask length: 128
State: Elected
Uptime: 00:01:10