R3303-HP HSR6800 Routers IP Multicast Configuration Guide

367
IPv6 PIM-SM admin-scoped zone configuration example
Network requirements
The receivers receive VOD information through multicast. The entire IPv6 PIM-SM domain is divided into
IPv6 admin-scoped zone 1, IPv6 admin-scoped zone 2, and the IPv6 global-scoped zone. Router B,
Router C, and Router D are ZBRs of the three domains, respectively.
Source 1 and Source 2 send different multicast information to FF14::101. Host A receives the multicast
information from Source 1 only, and Host B receives the multicast information from Source 2 only. Source
3 sends multicast information to FF1E::202. Host C is a multicast receiver for this multicast group.
Serial 3/1/1 of Router B acts as a C-BSR and C-RP of IPv6 admin-scoped zone 1, which serve the IPv6
multicast groups with the Scope field value in their group addresses being 4. Serial 3/1/1 of Router D
acts as a C-BSR and C-RP of admin-scoped zone 2, which also serve the IPv6 multicast groups with the
Scope field value in their group addresses being 4. Serial 3/1/1 of Router F acts as a C-BSR and a C-RP
of the global-scoped zone, which serve IPv6 multicast groups with the Scope field value in their group
addresses being 14.
MLDv1 runs between Router A, Router E, Router I, and their respective receivers.