R3303-HP HSR6800 Routers IP Multicast Configuration Guide

381
<RouterB> system-view
[RouterB] multicast ipv6 routing-enable
[RouterB] interface gigabitethernet 2/1/1
[RouterB-GigabitEthernet2/1/1] mld enable
[RouterB-GigabitEthernet2/1/1] pim ipv6 sm
[RouterB-GigabitEthernet2/1/1] quit
[RouterB] interface serial 3/1/1
[RouterB-Serial3/1/1] pim ipv6 sm
[RouterB-Serial3/1/1] quit
[RouterB] interface serial 3/1/2
[RouterB-Serial3/1/2] pim ipv6 sm
[RouterB-Serial3/1/2] quit
[RouterB] pim ipv6
[RouterB-pim6] bidir-pim enable
[RouterB-pim6] quit
# On Router C, enable IPv6 multicast routing, enable IPv6 PIM-SM on each interface, and enable
IPv6 BIDIR-PIM.
<RouterC> system-view
[RouterC] multicast ipv6 routing-enable
[RouterC] interface serial 3/1/1
[RouterC-Serial3/1/1] pim ipv6 sm
[RouterC-Serial3/1/1] quit
[RouterC] interface serial 3/1/2
[RouterC-Serial3/1/2] pim ipv6 sm
[RouterC-Serial3/1/2] quit
[RouterC] interface loopback 0
[RouterC-LoopBack0] pim ipv6 sm
[RouterC-LoopBack0] quit
[RouterC] pim ipv6
[RouterC-pim6] bidir-pim enable
# On Router D, enable IPv6 multicast routing, enable IPv6 PIM-SM on each interface, enable MLD
on interface GigabitEthernet 2/1/1, and enable IPv6 BIDIR-PIM.
<RouterD> system-view
[RouterD] multicast ipv6 routing-enable
[RouterD] interface gigabitethernet 2/1/1
[RouterD-GigabitEthernet2/1/1] mld enable
[RouterD-GigabitEthernet2/1/1] pim ipv6 sm
[RouterD-GigabitEthernet2/1/1] quit
[RouterD] interface gigabitethernet 2/1/2
[RouterD-GigabitEthernet2/1/2] pim ipv6 sm
[RouterD-GigabitEthernet2/1/2] quit
[RouterD] interface serial 3/1/1
[RouterD-Serial3/1/1] pim ipv6 sm
[RouterD-Serial3/1/1] quit
[RouterD] pim ipv6
[RouterD-pim6] bidir-pim enable
[RouterD-pim6] quit
4. Configure C-BSR and C-RP: