R3303-HP HSR6800 Routers IP Multicast Configuration Guide

384
MID: 0, Flags: 0x2100000:0
Uptime: 00:05:12
RPF interface: Serial3/1/1
List of 2 DF interfaces:
1: GigabitEthernet2/1/1
2: GigabitEthernet2/1/2
IPv6 PIM-SSM configuration example
Network requirements
The receivers receive VOD information through multicast. The receiver groups of different organizations
form stub networks, and one or more receiver hosts exist in each stub network. The entire IPv6 PIM
domain operates in the SSM mode.
Host A and Host C are IPv6 multicast receivers in two stub networks, N1 and N2.
The SSM group range is FF3E::/64.
MLDv2 runs between Router A and N1 and between Router B, Router C, and N2.
Figure 105 Network diagram
Device Interface IPv6 address Device Interface IPv6 address
Router A GE2/1/1 1001::1/64 Router D GE2/1/1 4001::1/64
S3/1
/
0 1002::1/64 S3/1
/
0 1002::2/64
POS5/1/0 1003::1/64 POS5/1/0 4002::1/64
Router B GE2/1/1 2001::1/64 Router E POS5/1/0 3001::2/64
POS5/1/0 2002::1/64 POS5/1/1 2002::2/64
Router C GE2/1/1 2001::2
/
64 POS5/1/2 1003::2/64
POS5/1/0 3001::1/64 POS5/1/3 4002::2/64
Ethernet
EthernetEthernet
N1N2
S3/1
/0
S3/1/0