R3303-HP HSR6800 Routers IP Multicast Configuration Guide

37
# Configure GigabitEthernet 2/0/2 as a hybrid port and its PVID to be 2. Configure
GigabitEthernet 2/0/2 to permit packets from VLAN 2 and VLAN 10 to pass and untag the
packets when forwarding them.
[RouterB] interface gigabitethernet 2/0/2
[RouterB-GigabitEthernet2/0/2] port link-type hybrid
[RouterB-GigabitEthernet2/0/2] port hybrid pvid vlan 2
[RouterB-GigabitEthernet2/0/2] port hybrid vlan 2 untagged
[RouterB-GigabitEthernet2/0/2] port hybrid vlan 10 untagged
[RouterB-GigabitEthernet2/0/2] quit
# Configuration GigabitEthernet 2/0/3 and GigabitEthernet 2/0/4 in the same way as you
configure GigabitEthernet 2/0/2. (Details not shown.)
# Configure VLAN 10 as a multicast VLAN.
[RouterB] multicast-vlan 10
# Assign GigabitEthernet 2/0/2 and GigabitEthernet 2/0/3 to VLAN 10.
[RouterB-mvlan-10] port gigabitethernet 2/0/2 to gigabitethernet 2/0/3
[RouterB-mvlan-10] quit
# Assign GigabitEthernet 2/0/4 to VLAN 10.
[RouterB] interface gigabitethernet 2/0/4
[RouterB-GigabitEthernet2/0/4] port multicast-vlan 10
[RouterB-GigabitEthernet2/0/4] quit
3. Verify the configuration:
# Display multicast VLAN information on RouterB.
[RouterB] display multicast-vlan
Total 1 multicast-vlan(s)
Multicast vlan 10
subvlan list:
no subvlan
port list:
GE2/0/2 GE2/0/3 GE2/0/4
# Display IGMP snooping multicast group information on Router B.
[RouterB] display igmp-snooping group
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Port flags: D-Dynamic port, S-Static port, C-Copy port, P-PIM port
Subvlan flags: R-Real VLAN, C-Copy VLAN
Vlan(id):10.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
GE2/0/1 (D)
IP group(s):the following ip group(s) match to one mac group.
IP group address:224.1.1.1
(0.0.0.0, 224.1.1.1):