Manualshelf

R3303-HP HSR6800 Routers IRF Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
12345678910
7
Table 4 Command output
Field Descri
p
tion
Current MAD status
MAD status:
• Detect—The IRF fabric is integrated.
• Recovery—IRF fabric is in Recovery state. When detecting a
multi-active collision, MAD places the IRF fabric with higher master ID in
Recovery state. MAD also shuts down all physical ports in the fabric
except IRF physical ports and ports that are configured to not shut
down.
• Detect to Recovery—State of the IRF fabric is transitioning from Detect to
Recovery, for example, as the result of an IRF split.
• Recovery to Detect—State of the IRF fabric is transitioning from
Recovery to Detect.
Excluded ports(configurable)
Ports manually configured to not shut down when the IRF fabric transitions
to the Recovery state.
Excluded ports(can not be
configured)
Ports set by default to not shut down when the IRF fabric transitions to the
Recovery state.
irf auto-merge enable
Use irf auto-merge enable to enable IRF auto merge. The function enables an IRF fabric to automatically
reboot its member devices when it fails in the master election during an IRF fabric merge.
Use undo irf auto-merge enable to disable this function.
Syntax
irf auto-merge enable
undo irf auto-merge enable
Default
This function is disabled. To complete an IRF merge, you must manually reboot the IRF fabric that has
failed in the master election.
Views
System view
Default command level
3: Manage level
Usage guidelines
To avoid an auto merge failure, make sure the auto merge function is enabled on both IRF fabrics that are
merging.
This command is available in IRF mode. When the operating mode is changed to standalone, the
configuration of this command is lost, regardless of whether you have saved the configuration.
The IRF auto merge function takes effect for an IRF merge that occurs when the IRF link recovers from a link
failure, or when you connect the IRF physical ports of the member devices. It does not take effect for the
IRF merge that occurs when you bind a physical port to an IRF port in IRF mode.