R3303-HP HSR6800 Routers IRF Command Reference

12
To change the member ID of a device in IRF mode, use the irf member member-id renumber
new-member-id command.
Examples
# Assign member ID 2 to the device in standalone mode.
<Sysname> system-view
[Sysname] irf member 2
Info: Member ID change will take effect after the member reboots and operates in IRF mode.
Related commands
irf member renumber
irf member description
Use irf member description to configure a description for an IRF member.
Use undo irf member description to restore the default.
Syntax
irf member member-id description text
undo irf member member-id description
Default
No description is configured for any IRF member.
Views
System view
Default command level
3: Manage level
Parameters
member-id: Specifies the ID of an IRF member.
text: Configures the IRF member description, a string of 1 to 127 characters.
Usage guidelines
Configure a description to identify the physical location or purpose of an IRF member for easy
maintenance.
This command is available in IRF mode. Changing the operating mode from IRF to standalone can cause
loss of the IRF member description even if you have saved the configuration.
Examples
# Configure a description for IRF member 1.
<Sysname> system-view
[Sysname] irf member 1 description F1Num001
irf member priority
Use irf member priority to change the priority of an IRF member.
Use undo irf member priority to restore the default.