R3303-HP HSR6800 Routers IRF Command Reference

13
Syntax
irf member member-id priority priority
undo irf member member-id priority
Default
IRF member priority is 1.
Views
System view
Default command level
3: Manage level
Parameters
member-id: Specifies an IRF member ID.
priority: Sets priority in the range of 1 to 32. The greater the priority value, the higher the priority. A
member with higher priority is more likely to be the master.
Usage guidelines
Change member priority assignment to affect the maser election result.
This command is available in IRF mode. The new priority setting takes effect at the next master election,
but it does not trigger master election.
To assign an IRF priority to a device in standalone mode, use the irf priority command.
Examples
# Change the priority of IRF member 2 to 32.
<Sysname> system-view
[Sysname] irf member 2 priority 32
Related commands
irf priority
irf member renumber
Use irf member renumber to change the member ID of a device in the IRF fabric.
Use undo irf member renumber to set the member ID of a device in the IRF fabric to 1.
Syntax
irf member member-id renumber new-member-id
undo irf member member-id renumber
Default
In standalone mode, the device has no member ID.
In IRF mode, the device by default uses the member ID set by using the irf member command.
Views
System view