R3303-HP HSR6800 Routers IRF Command Reference

3
Table 1 Command output
Field Descri
p
tion
MemberID
IRF member ID:
• ID of the master is prefixed with an asterisk (*) sign.
• ID of the device where you are logged in is prefixed with a plus (+) sign.
Slot MPU slot number.
Role
Role of the MPU in the IRF fabric:
• Slave—Standby MPU for the global active MPU.
• Master—Global active MPU.
• SlaveWait—MPU that is joining the IRF fabric as a standby for the
global active MPU.
• Loading—Standby MPU for the global active MPU. This standby MPU is
loading the system software image.
Priority IRF member priority.
CPU-MAC CPU MAC address of the MPU.
Description
Description you have configured for the member device.
• If no description is configured, this field displays a dashed line (-----).
• If the description exceeds the maximum number of characters that can
be displayed, an ellipsis (…) is displayed in place of the exceeding text.
To display the complete description, use the display
current-configuration command.
Auto upgrade
Status of the software auto-update function:
• yes—Enabled. The master device automatically propagates its system
software image to the device you are adding to the IRF fabric.
• no—Disabled. You must manually make sure the joining device uses the
same system software image as the master device. If not, the new device
cannot join the IRF fabric.
MAC persistent
IRF bridge MAC persistence setting:
• 6 min—Bridge MAC address of the IRF fabric persists for six minutes
after the master leaves.
• always—Bridge MAC address of the IRF fabric does not change after
the master leaves.
• no—Bridge MAC address of the new master replaces the original one
as soon as the old master leaves.
Auto merge
State of the auto merge function:
• yes—Enabled.
• no—Disabled.
display irf configuration
Use display irf configuration to display basic IRF settings.
Syntax
display irf configuration [ | { begin | exclude | include } regular-expression ]