R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

105
port hybrid vlan
Use port hybrid vlan to assign the hybrid ports to the specified VLANs.
Use undo port hybrid vlan to remove the hybrid ports from the specified VLANs.
Syntax
port hybrid vlan vlan-list { tagged | untagged }
undo port hybrid vlan vlan-list
Default
A hybrid port only allows packets from VLAN 1 to pass through untagged.
Views
Ethernet interface view, port group view, Layer 2 aggregate interface view
Default command level
2: System level
Parameters
vlan-list: Specifies a list of VLANs that the hybrid ports will be assigned to in the format of { vlan-id1 [ to
vlan-id2 ] }&<1-10>, where vlan-id1 and vlan-id2 represent VLAN IDs and each in the range of 1 to
4094, vlan-id2 must be no smaller than vlan-id1, and &<1-10> indicates that you can specify up to 10
VLAN IDs or VLAN ID ranges. Make sure the specified VLANs already exist.
tagged: Configures the ports to send the tagged packets of the specified VLANs.
untagged: Configures the ports to send the untagged packets of the specified VLANs.
Usage guidelines
A hybrid port can carry multiple VLANs. If you execute the port hybrid vlan command multiple times, the
VLANs the hybrid port carries are the set of VLANs specified by vlan-list in each execution.
The configuration made in Ethernet interface view applies only to the port.
The configuration made in port group view applies to all ports in the port group.
The configuration made in Layer 2 aggregate interface view applies to the aggregate interface and its
aggregation member ports.
• If the system fails to apply the configuration to the aggregate interface, it stops applying the
configuration to aggregation member ports.
• If the system fails to apply the configuration to an aggregation member port, it skips the port and
moves to the next member port.
Examples
# Assign the hybrid port GigabitEthernet 4/0/1 to VLAN 2, VLAN 4, and VLAN 50 through VLAN 100,
and configure GigabitEthernet 4/0/1 to send packets of these VLANs with tags kept.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] port link-type hybrid
[Sysname-GigabitEthernet4/0/1] port hybrid vlan 2 4 50 to 100 tagged
# Assign hybrid ports in port group 2 to VLAN 2, and configure these hybrid ports to send packets of
VLAN 2 with VLAN tags removed.