R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

111
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
If mac-address mac-address is specified, but mask is not specified, only the MAC address-to-VLAN entry
containing the specified MAC address is displayed.
Examples
# Display all MAC address-to-VLAN entries.
<Sysname> display mac-vlan all
The following MAC-VLAN address exist:
S: Static D: Dynamic
MAC ADDR MASK VLAN ID PRIO STATE
-------------------------------------------------------------------
0008-0001-0000 FFFF-FF00-0000 5 3 S
0002-0001-0000 FFFF-FFFF-FFFF 5 3 S&D
Total MAC VLAN address count:2
Table 24 Command output
Field Descri
p
tion
S: Static S stands for the MAC address-to-VLAN entries that are configured statically.
D: Dynamic D stands for the MAC address-to-VLAN entries that are configured dynamically.
MAC ADDR MAC address of a MAC address-to-VLAN entry.
MASK Mask of the MAC address of a MAC address-to-VLAN entry.
VLAN ID VLAN ID of a MAC address-to-VLAN entry.
PRIO
802.1p priority corresponding to the MAC address of a MAC address-to-VLAN
entry.
STATE
State of a MAC address-to-VLAN entry:
• S—The MAC address-to-VLAN entry is configured statically.
• D—The MAC address-to-VLAN entry is configured automatically through the
authentication server.
• S&D—The MAC address-to-VLAN entry is configured both statically and
dynamically.
display mac-vlan interface
Use display mac-vlan interface to display all ports with MAC-based VLAN enabled.
Syntax
display mac-vlan interface [ | { begin | exclude | include } regular-expression ]