R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

124
Super VLAN configuration commands
The super VLAN feature is supported on SAP modules that are operating in bridge mode.
display supervlan
Use display supervlan to display the mapping between a super VLAN and sub-VLANs, and to display
information about these VLANs.
Syntax
display supervlan [ supervlan-id ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
supervlan-id: Specifies a super VLAN ID in the range of 1 to 4094.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the mapping between a super VLAN and sub-VLANs.
<Sysname> display supervlan 2
Supervlan ID : 2
Subvlan ID : 3-5
VLAN ID: 2
VLAN Type: static
It is a Super VLAN.
Route Interface: configured
IP Address: 10.153.17.41
Subnet Mask: 255.255.252.0
Description: VLAN 0002
Name: VLAN 0002
Tagged Ports: none
Untagged Ports: none
VLAN ID: 3