R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

127
undo supervlan
Views
VLAN view
Default command level
2: System level
Usage guidelines
You cannot configure a super VLAN as the guest VLAN for a port, and vice versa. For more information
about guest VLANs, see Security Configuration Guide.
You can configure Layer 2 multicast for a super VLAN. However, the configuration cannot take effect.
You can configure DHCP, Layer 3 multicast, dynamic routing, and NAT for the VLAN-interface of a super
VLAN. However, only DHCP can take effect.
HP recommends not configuring VRRP for the VLAN-interface of a super VLAN, because the
configuration affects network performance.
Examples
# Configure VLAN 2 as a super VLAN.
<Sysname> system-view
[Sysname] vlan 2
[Sysname-vlan2] supervlan
Related commands
display supervlan