R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

132
Default
The system is configured with the default OUI addresses. You can remove the default OUI addresses, and
then add recognizable OUI addresses manually.
Table 32 Default OUI addresses
Number OUI
address Vendor
1 0001-E300-0000 Siemens phone
2 0003-6B00-0000 Cisco phone
3 0004-0D00-0000 Avaya phone
4 00D0-1E00-0000 Pingtel phone
5 0060-B900-0000 Philips/NEC phone
6 00E0-7500-0000 Polycom phone
7 00E0-BB00-0000 3Com phone
Views
System view
Default command level
2: System level
Parameters
mac-address: Specifies a source MAC address of voice traffic in the format of H-H-H. For example,
1234 -123 4 -123 4 .
mask oui-mask: Specifies the valid length of the OUI address by a mask in the format of H-H-H, formed
by consecutive 1s and 0s. For example, FFFF-0000-0000. To filter the voice device of a specific vendor,
set the mask to FFFF-FF00-0000.
description text: Specifies a string of 1 to 30 case-sensitive characters that describes the OUI address.
oui: Specifies the OUI address you want to remove in the format of H-H-H. For example,
1234-1200-0000. An OUI address is the logic AND result of mac-address and oui-mask. An OUI
address cannot be a broadcast address, a multicast address, or an all-zero address.
Usage guidelines
The system supports up to 16 OUI addresses.
Examples
# Add a recognizable OUI address 1234-1200-0000 by specifying the MAC address as
1234-1234-1234 and the mask as fff-ff00-0000, and configure its description string as PhoneA.
<Sysname> system-view
[Sysname] voice vlan mac-address 1234-1234-1234 mask ffff-ff00-0000 description PhoneA
Related commands
display voice vlan oui
voice vlan mode auto
Use voice vlan mode auto to configure the port to operate in automatic voice VLAN assignment mode.