R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

133
Use undo voice vlan mode auto to configure the port to operate in manual voice VLAN assignment
mode.
Syntax
voice vlan mode auto
undo voice vlan mode auto
Default
A port operates in automatic voice VLAN assignment mode.
Views
Ethernet interface view
Default command level
2: System level
Usage guidelines
The voice VLAN modes of different ports are independent of one another.
To make voice VLAN take effect on a port which is enabled with voice VLAN and operates in manual
voice VLAN assignment mode, manually assign the port to the voice VLAN.
Examples
# Configure GigabitEthernet 4/0/1 to operate in manual voice VLAN assignment mode.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] undo voice vlan mode auto
voice vlan qos
Use voice vlan qos to configure the interface to modify the CoS and DSCP values marked for incoming
traffic of the voice VLAN into specified values.
Use undo voice vlan qos to restore the default.
Syntax
voice vlan qos cos-value dscp-value
undo voice vlan qos
Default
An interface modifies the CoS value and the DSCP value marked for voice VLAN traffic into 6 and 46,
respectively.
Views
Interface view
Default command level
2: System level
Parameters
cos-value: Sets the CoS precedence value for voice VLAN traffic. The default value is 6.
dscp-value: Sets the DSCP value for voice VLAN traffic. The default value is 46.