R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

137
<Sysname> display garp statistics interface GigabitEthernet 4/0/1 to GigabitEthernet 4/0/2
GARP statistics on port GigabitEthernet4/0/1
Number of GVRP Frames Received : 5
Number of GVRP Frames Transmitted : 2
Number of Frames Discarded : 1
GARP statistics on port GigabitEthernet4/0/2
Number of GVRP Frames Received : 3
Number of GVRP Frames Transmitted : 4
Number of Frames Discarded : 2
Related commands
reset garp statistics
display garp timer
Use display garp timer to display GARP timers on specific ports. If no ports are specified, this command
displays the GARP timers on all ports.
Syntax
display garp timer [ interface interface-list ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
interface interface-list: Displays the GARP timer settings of one or multiple ports. You can specify up to 10
port lists. By using each port list, you can specify a single port in the form of interface-type
interface-number, or a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end port number specified by interface-number2 must be greater than the
start port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GARP timers on port GigabitEthernet 4/0/1.
<Sysname> display garp timer interface GigabitEthernet 4/0/1
GARP timers on port GigabitEthernet4/0/1