R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

141
Default command level
1: Monitor level
Parameters
interface interface-list: Displays the GVRP statistics of one or multiple Ethernet ports. You can specify up
to 10 Ethernet port lists, by each of which you can specify an individual port in the form of interface-type
interface-number, or a port range in the form of interface-type interface-number1 to interface-type
interface-number2, where the end-port number specified by interface-number2 must be greater than the
start-port number specified by interface-number1.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display GVRP statistics for trunk port GigabitEthernet 4/0/1.
<Sysname> display gvrp statistics interface GigabitEthernet 4/0/1
GVRP statistics on port GigabitEthernet4/0/1
GVRP Status : Enabled
GVRP Running : YES
GVRP Failed Registrations : 0
GVRP Last Pdu Origin : 0000-0000-0000
GVRP Registration Type : Normal
Table 34 Command output
Field Descri
p
tion
GVRP Status Indicates whether GVRP is enabled or disabled.
GVRP Running Indicates whether GVRP is running.
GVRP Failed Registrations Indicates the number of GVRP registration failures.
GVRP Last Pdu Origin Indicates the source MAC address in the last GVRP PDU.
GVRP Registration Type
Indicates the GVRP registration mode (fixed, forbidden, or
normal) on the port.
display gvrp status
Use display gvrp status to display the global GVRP state.
Syntax
display gvrp status [ | { begin | exclude | include } regular-expression ]
Views
Any view