R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

143
Operations of adding VLAN to TRUNK : 2-100
Operations of deleting VLAN from TRUNK : none
garp timer hold
Use garp timer hold to set the GARP Hold timer for an Ethernet port, Layer-2 aggregate interface, or all
ports in a port group.
Use undo garp timer hold to restore the default of the GARP Hold timer. This operation might fail if the
default is beyond the valid value range for the Hold timer.
Syntax
garp timer hold timer-value
undo garp timer hold
Default
The Hold timer is 10 centiseconds.
Views
Ethernet interface view, Layer-2 aggregate interface view, port group view
Default command level
2: System level
Parameters
timer-value: Specifies the Hold timer (in centiseconds), which must be a multiple of 5 and in the range of
10 (inclusive) to half the Join timer (inclusive).
Examples
# Set the GARP Hold timer to 15 centiseconds, assuming that the Join timer is 30 centiseconds.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] garp timer hold 15
Related commands
• display garp timer
• garp timer join
garp timer join
Use garp timer join to set the GARP Join timer for an Ethernet port, Layer-2 aggregate interface, or all
ports in a port group.
Use undo garp timer join to restore the default of the GARP Join timer. This may fail if the default is
beyond the valid value range for the Join timer.
Syntax
garp timer join timer-value
undo garp timer join