R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

176
lldp compliance cdp
Use lldp compliance cdp to enable global CDP compatibility.
Use undo lldp compliance cdp to restore the default.
Syntax
lldp compliance cdp
undo lldp compliance cdp
Default
CDP compatibility is globally disabled.
Views
System view
Default command level
2: System level
Usage guidelines
Because the maximum TTL allowed by CDP is 255 seconds, the TTL configuration must be no more than
255 seconds for CDP-compatible LLDP to operate with Cisco IP phones. The TTL configuration is the
product of the TTL multiplier and the LLDPDU transmit interval.
Examples
# Enable LLDP to be compatible with CDP globally.
<Sysname> system-view
[Sysname] lldp compliance cdp
Related commands
• lldp hold-multiplier
• lldp timer tx-interval
lldp enable
Use lldp enable to enable LLDP.
Use undo lldp enable to disable LLDP.
Syntax
lldp enable
undo lldp enable
Default
LLDP is enabled on a port and disabled globally.
Views
System view, Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level