R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

178
lldp fast-count
Use lldp fast-count to set the number of the LLDPDUs sent each time fast LLDPDU transmission is triggered.
Use undo lldp fast-count to restore the default.
Syntax
lldp fast-count count
undo lldp fast-count
Default
The number is 3.
Views
System view
Default command level
2: System level
Parameters
count: Sets the number of the LLDPDUs sent each time fast LLDPDU transmission is triggered. The value
range is 1 to 10.
Examples
# Configure the device to send four LLDPDUs each time fast LLDPDU transmission is triggered.
<Sysname> system-view
[Sysname] lldp fast-count 4
lldp hold-multiplier
Use lldp hold-multiplier to set the TTL multiplier.
Use undo lldp hold-multiplier to restore the default.
Syntax
lldp hold-multiplier value
undo lldp hold-multiplier
Default
The TTL multiplier is 4.
Views
System view
Default command level
2: System level
Parameters
value: Sets the TTL multiplier in the range of 2 to 10.
Usage guidelines
You can set the TTL of the local device information by configuring the TTL multiplier.