R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

179
The TTL configuration of a device is determined by the expression:
TTL multiplier × LLDPDU transmit interval
The TTL can be up to 65535 seconds. Longer TTLs will be rounded off to 65535 seconds.
Examples
# Set the TTL multiplier to 6.
<Sysname> system-view
[Sysname] lldp hold-multiplier 6
Related commands
lldp timer tx-interval
lldp management-address-format string
Use lldp management-address-format string to encapsulate the management address in the form of
strings in TLVs.
Use undo lldp management-address-format to restore the default.
Syntax
lldp management-address-format string
undo lldp management-address-format
Default
The management address is encapsulated in the form of numbers in TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command HSR6802/HSR6804/HSR6808
lldp
management-address-format
string
Yes on SAP modules operating in bridge mode
Examples
# Configure GigabitEthernet 4/0/1 to encapsulate the management address in the form of strings in
management address TLVs.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp management-address-format string