R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

181
lldp notification remote-change enable
Use lldp notification remote-change enable to enable LLDP trapping for a port or all ports in a port
group.
Use undo lldp notification remote-change enable to disable LLDP trapping.
Syntax
lldp notification remote-change enable
undo lldp notification remote-change enable
Default
LLDP trapping is disabled on ports.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Usage guidelines
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command HSR6802/HSR6804/HSR6808
lldp notification remote-change
enable
Yes on SAP modules operating in bridge mode
Examples
# Enable LLDP trapping for GigabitEthernet 4/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp notification remote-change enable
lldp timer notification-interval
Use lldp timer notification-interval to set the LLDP trap transmit interval.
Use undo lldp timer notification-interval to restore the default.
Syntax
lldp timer notification-interval interval
undo lldp timer notification-interval
Default
The LLDP trap transmit interval is 5 seconds.
Views
System view
Default command level
2: System level