R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

12
undo mac-address information enable
Default
MAC Information is disabled globally.
Views
System view
Default command level
2: System level
Examples
# Enable MAC Information globally.
<Sysname> system-view
[Sysname] mac-address information enable
mac-address information interval
Use mac-address information interval to set the interval for sending syslog or trap messages.
Use undo mac-address information interval to restore the default.
Syntax
mac-address information interval interval-time
undo mac-address information interval
Default
The interval for sending syslog or trap messages is 1 second.
Views
System view
Default command level
2: System level
Parameters
interval-time: Sets the interval for sending syslog or trap messages, in the range of 1 to 20000 seconds.
Examples
# Set the interval for sending syslog or trap messages to 200 seconds.
<Sysname> system-view
[Sysname] mac-address information interval 200
mac-address information mode
Use mac-address information mode to set the MAC Information mode (to use syslog messages or trap
messages) to inform the remote network management device of MAC address changes.
Use undo mac-address information mode to restore the default.
Syntax
mac-address information mode { syslog | trap }