R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

184
[Sysname] lldp timer tx-interval 20
Related commands
lldp timer tx-delay
lldp tlv-enable
Use lldp tlv-enable to configure the types of advertisable TLVs for a port or all ports in a port group.
Use undo lldp tlv-enable to disable the advertising of specific types of TLVs.
Syntax
In Layer 2 Ethernet interface view or port group view:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id [ vlan-id ] | vlan-name [ vlan-id ] } |
dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv { all | capability
| inventory | location-id { civic-address device-type country-code { ca-type ca-value }&<1-10> |
elin-address tel-number } | network-policy | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot1-tlv { all | port-vlan-id | protocol-vlan-id | vlan-name } | dot3-tlv { all |
link-aggregation | mac
-physic | max-frame-size | power } | med-tlv { all | capability | inventory |
location-id | network-policy | power-over-ethernet } }
In Layer 3 Ethernet interface view:
lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot3-tlv { all | link-aggregation | mac-physic | max-frame-size | power } | med-tlv
{ all | capability | inventory | location-id { civic-address device-type country-code { ca-type
ca-value }&<1-10> | elin-address tel-number } | power-over-ethernet } }
undo lldp tlv-enable { basic-tlv { all | port-description | system-capability | system-description |
system-name } | dot3-tlv { all | link-aggregation | mac-physic | max
-frame-size | power } | med-tlv
{ all | capability | inventory | location-id | power-over-ethernet } }
Default
The device can advertise on a Layer 2 Ethernet port all types of LLDP TLVs except location identification
TLVs, and advertise on a Layer 3 Ethernet port all types of LLDP TLVs except IEEE 802.1 organizationally
specific TLVs, network policy TLVs, and location identification TLVs.
Views
Layer 2 Ethernet interface view, Layer 3 Ethernet interface view, port group view
Default command level
2: System level
Parameters
all: Advertises all basic LLDP TLVs, IEEE 802.1 organizationally specific LLDP TLVs, or IEEE 802.3
organizationally specific LLDP TLVs when the all keyword is specified for basic-tlv, dot1-tlv, or dot3-tlv in
Layer 2 Ethernet interface view; advertises all basic LLDP TLVs or IEEE 802.3 organizationally specific
LLDP TLVs when the all keyword is specified for basic-tlv or dot3-tlv in Layer 3 Ethernet interface view; or
advertises all LLDP-MED TLVs except location identification TLVs when the all keyword is specified for
med-tlv, regardless of whether in Layer 2 or Layer 3 Ethernet interface view.
basic-tlv: Advertises basic LLDP TLVs.