R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

186
To disable the device from advertising MAC/PHY configuration/status TLVs, you must first disable it from
advertising LLDP-MED capabilities TLVs.
If you enable the device to advertise LLDP-MED capabilities TLVs, you also enable it to advertise
MAC/PHY configuration/status TLVs.
You can configure multiple types of TLVs by using the lldp tlv-enable command without the all keyword
specified.
The following matrix shows the command and router compatibility in Layer 2 Ethernet interface view:
Command HSR6802/HSR6804/HSR6808
lldp tlv-enable Yes on SAP modules operating in bridge mode
Examples
# Enable the device to advertise link aggregation TLVs of the IEEE 802.3 organizationally specific TLVs
on GigabitEthernet 4/0/1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] lldp tlv-enable dot3-tlv link-aggregation