Manualshelf

R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

ManualsBrandsHP ManualsNetwork HardwareHP HSR6804 Router Chassis
11121314151617181920
13
undo mac-address information mode
Default
Trap messages are sent to inform the remote network management device of MAC address changes.
Views
System view
Default command level
2: System level
Parameters
syslog: Specifies that the device sends syslog messages to inform the remote network management
device of MAC address changes.
trap: Specifies that the device sends trap messages to inform the remote network management device of
MAC address changes.
Examples
# Configure the device to send trap messages to inform the remote network management device of MAC
address changes.
<Sysname> system-view
[Sysname] mac-address information mode trap
mac-address information queue-length
Use mac-address information queue-length to set the MAC Information queue length.
Use undo mac-address information queue-length to restore the default.
Syntax
mac-address information queue-length value
undo mac-address information queue-length
Default
The MAC Information queue length is 50.
Views
System view
Default command level
2: System level
Parameters
value: Specifies the MAC Information queue length in the range of 0 to 1000.
Examples
# Set the MAC Information queue length to 600.
<Sysname> system-view
[Sysname] mac-address information queue-length 600