R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

14
Ethernet link aggregation configuration
commands
Layer 2 aggregation groups are supported only on SAP modules operating in bridge mode.
bandwidth
Use bandwidth to set the expected bandwidth for an aggregate interface or subinterface.
Use undo bandwidth to cancel the configuration.
Syntax
bandwidth bandwidth-value
undo bandwidth
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface
view
Default command level
2: System level
Parameters
bandwidth-value: Specifies the expected bandwidth in the range of 1 to 4294967295 kbps.
Usage guidelines
You can get the expected bandwidth of an interface by querying the ifspeed value of the MIB node with
third-party software.
The expected bandwidth is used by network management systems for monitoring bandwidth, but does
not affect the actual bandwidth of the interface.
Examples
# Set the expected bandwidth to 10,000 kbps for Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1] bandwidth 10000
description
Use description to set a description for an interface. For example, you can include information such as
the purpose of the interface for the ease of management.
Use undo description to restore the default setting.
Syntax
description text