R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

21
Link-Aggregation Load-Sharing Mode:
destination-mac address, source-mac address
# Display the default link-aggregation load sharing criteria of the aggregation group corresponding to
Layer 2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
Layer 2 traffic: destination-mac address, source-mac address
Layer 3 traffic: destination-ip address, source-ip address
# Display the configured link-aggregation load sharing criteria of the aggregation group corresponding
to Layer 2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
destination-mac address, source-mac address
Table 6 Command output
Field Description
Link-Aggregation Load-Sharing
Mode
Global link-aggregation load sharing criteria.
• If you have not configured the global link-aggregation load sharing
criteria, the default link-aggregation load sharing criteria for Layer 2
traffic and Layer 3 traffic are displayed.
• If you have configured the global link-aggregation load sharing
criteria, the configured ones are displayed.
Bridge-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to the aggregate interface Bridge-Aggregation 10.
• If you have not configured the link-aggregation load sharing criteria
especially for this aggregation group, the global link-aggregation
load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Route-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group
corresponding to aggregate interface Route-Aggregation 10.
• If you have not configured the link-aggregation load sharing criteria
especially for this aggregation group, the global link-aggregation
load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria
especially for this aggregation group, the configured ones are
displayed.
Layer 2 traffic: destination-mac
address, source-mac address
Default link-aggregation load sharing criteria for Layer 2 traffic.
Layer 3 traffic: destination-ip
address, source-ip address
Default link-aggregation load sharing criteria for Layer 3 traffic.
destination-mac address,
source-mac address
User-configured link-aggregation load sharing criteria. In this sample
output, the criteria are the source and destination MAC addresses of
packets.