R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,

D -- Synchronization, E -- Collecting, F -- Distributing,

G -- Defaulted, H -- Expired

GigabitEthernet4/0/2:

Aggregation Interface: Bridge-Aggregation10

Local:

Port Number: 2

Port Priority: 32768

Oper-Key: 2

Flag: {ACDEF}

Remote:

System ID: 0x8000, 000f-e267-6c6a

Port Number: 26

Port Priority: 32768

Oper-Key: 2

Flag: {ACDEF}

Received LACP Packets: 5 packet(s)

Illegal: 0 packet(s)

Sent LACP Packets: 7 packet(s)

Table 7 Command output

Field Description

Flags

LACP state flags. This field is one byte long, represented by ABCDEFGH from the

least significant bit to the most significant bit. The letter is present when its bit is 1

and absent when its bit is 0.

• A—Whether LACP is enabled. 1 indicates enabled, and 0 indicates disabled.

• B—Whether the LACP timeout is short timeout or long timeout. 1 indicates

short timeout, and 0 indicates long timeout.

• C—Whether the sending system detects that the link is aggregatable. 1

indicates yes, and 0 indicates no.

• D—Whether the sending system detects that the link is synchronized. 1

indicates yes, and 0 indicates no.

• E—Whether the sending system detects that the incoming frames are

collected. 1 indicates yes, and 0 indicates no.

• F—Whether the sending system detects that the outgoing frames are

distributed. 1 indicates yes, and 0 indicates no.

• G—Whether the sending system receives frames in default state. 1 indicates

yes, and 0 indicates no.

• H—Whether the sending system receives frames in expired state. 1 indicates

yes, and 0 indicates no.

Aggregation Interface Aggregate interface to which the member port belongs.

Local Information about the local end.

Port Priority Aggregation priority of the port.

Oper-key Operational key.

Flag LACP protocol state flag.