R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

25
BAGG1 S none 1 0 Shar
BAGG10 D 0x8000, 000f-e267-57ad 2 0 Shar
Table 8 Command output
Field Description
Aggregation Interface Type
Aggregate interface type:
• BAGG—Layer 2 aggregate interface.
• RAGG—Layer 3 aggregate interface.
Aggregation Mode
Aggregation group type:
• S—Static link aggregation.
• D—Dynamic aggregation.
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Actor System ID
Local system ID, which comprises the system LACP priority and the
system MAC address.
AGG Interface Type and number of the aggregate interface.
AGG Mode Aggregation group type.
Partner ID
System ID of the partner, which comprises the system LACP priority
and the system MAC address.
Select Ports Total number of Selected ports.
Unselect Ports Total number of Unselected ports.
Share Type Load sharing type.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups
corresponding to the aggregate interfaces.
Syntax
display link-aggregation verbose [ { bridge-aggregation | route-aggregation } [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
route-aggregation: Displays detailed information about the Layer 3 aggregation groups corresponding
to Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number.