R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

Field Description

Port Port type and number.

Status Port state: selected or unselected.

Priority Port aggregation priority.

Oper-Key Operational key.

Flag LACP protocol state flag.

Remote Information about the remote end.

Actor Local port type and number.

Partner Remote port index.

enable snmp trap updown

Use enable snmp trap updown to enable linkUp/linkDown trap generation for the aggregate interface.

Use undo enable snmp trap updown to disable linkUp/linkDown trap generation for the aggregate

interface.

Syntax

enable snmp trap updown

undo enable snmp trap updown

Default

LinkUp/linkDown trap generation is enabled for an aggregate interface.

Views

Layer 2 aggregate interface view, Layer 3 aggregate interface view, Layer 3 aggregate subinterface

view

Default command level

2: System level

Usage guidelines

For an aggregate interface to generate linkUp/linkDown traps when its link state changes, you must

enable linkUp/linkDown trap generation globally with the snmp-agent trap enable [ standard

[ linkdown | linkup ] * ] command.

For more information about the snmp-agent trap enable command, see Network Management and

Monitoring Command Reference.

Examples

# Enable linkUp/linkDown trap generation on Layer 2 aggregate interface Bridge-Aggregation 1.

<Sysname> system-view

[Sysname] snmp-agent trap enable

[Sysname] interface bridge-aggregation 1

[Sysname-Bridge-Aggregation1] enable snmp trap updown