R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

29
interface bridge-aggregation
Use interface bridge-aggregation to create a Layer 2 aggregate interface and enter the Layer 2
aggregate interface view.
Use undo interface bridge-aggregation to remove a Layer 2 aggregate interface.
Syntax
interface bridge-aggregation interface-number
undo interface bridge-aggregation interface-number
Views
System view
Default command level
2: System level
Parameters
interface-number: Specifies a Layer 2 aggregate interface number in the range of 1 to 128.
Usage guidelines
When you create a Layer 2 aggregate interface, a Layer 2 aggregation group with the same number is
automatically created. If you remove the Layer 2 aggregate interface, you also remove the Layer 2
aggregation group, and any member ports will leave the aggregation group.
Examples
# Create Layer 2 aggregate interface Bridge-Aggregation 1 and enter its view.
<Sysname> system-view
[Sysname] interface bridge-aggregation 1
[Sysname-Bridge-Aggregation1]
interface route-aggregation
Use interface route-aggregation to create a Layer 3 aggregate interface or subinterface and enter the
Layer 3 aggregate interface or subinterface view.
Use undo interface route-aggregation to remove a Layer 3 aggregate interface or subinterface.
Syntax
interface route-aggregation { interface-number | interface-number.subnumber }
undo interface route-aggregation { interface-number | interface-number.subnumber }
Views
System view
Default command level
2: System level
Parameters
interface-number: Specifies a Layer 3 aggregate interface number in the range of 1 to 1024.