R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

35
undo port link-aggregation group
Views
Ethernet interface view
Default command level
2: System level
Parameters
number: Specifies the number of the aggregate interface corresponding to an aggregation group. The
value range for the this argument is 1 to 128 for Layer 2 Ethernet interfaces and 1 to 1024 for Layer 3
Ethernet interfaces.
Usage guidelines
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 Ethernet interface GigabitEthernet 4/0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/1
[Sysname-GigabitEthernet4/0/1] port link-aggregation group 1
# Assign Layer 3 Ethernet interface GigabitEthernet 4/0/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface GigabitEthernet 4/0/2
[Sysname-GigabitEthernet4/0/2] port link-aggregation group 2
reset counters interface
Use reset counters interface to clear the statistics of the specified aggregate interface or interfaces.
Syntax
reset counters interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
route-aggregation: Clears statistics for Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number.
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing
statistics of the interface.