R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

39
Port isolation configuration commands
The commands in this chapter are supported on SAP cards that are operating in bridge mode.
display port-isolate group
Use display port-isolate group to display port isolation group information.
Syntax
display port-isolate group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display port isolation group information.
<Sysname> display port-isolate group
Port-isolate group information:
Uplink port support: No
Group ID: 1
Group members:
GigabitEthernet4/0/2
Table 10 Command output
Field Description
Port-isolate group information Displays port isolation group information.
Uplink port support
Indicates whether the device supports configuring an uplink
port in the port isolation group.
Group ID Isolation group number.
Group members Isolated ports (non-uplink ports) in the isolation group.