R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

48
Field Description
Port Cost(Legacy)
Path cost of the port. The field in parentheses indicates the standard (legacy,
dot1d-1998, or dot1t) used for port path cost calculation.
• Config—Configured value.
• Active—Actual value.
Desg. Bridge/Port
Designated bridge ID and port ID of the port.
The port ID displayed is insignificant for a port which does not support port
priority.
Port Edged
The port is an edge port or non-edge port.
• Config—Configured value.
• Active—Actual value.
Point-to-point
The port is connected to a point-to-point link or not.
• Config—Configured value.
• Active—Actual value.
Transmit Limit Maximum number of packets sent within each hello time.
Protection Type
Protection type on the port:
• Root—Root guard.
• Loop—Loop guard.
• BPDU—BPDU guard.
• BPDU/ROOT—BPDU guard and root guard.
• None—No protection.
MST BPDU Format
Format of the MST BPDUs that the port can send, which can be legacy or 802.1s.
• Config—Configured value.
• Active—Actual value.
Port Config-
Digest-Snooping
Status of Digest Snooping on the port.
Rapid transition The port rapidly transits to the forwarding state or not in the MSTI.
Num of Vlans Mapped Number of VLANs mapped to the MSTI.
PortTimes
Major parameters for the port:
• Hello—Hello timer.
• MaxAge—Max Age timer.
• FwDly—Forward delay timer.
• MsgAge—Message Age timer.
• RemHop—Remaining hops.
BPDU Sent Statistics on sent BPDUs.
BPDU Received Statistics on received BPDUs.
MSTI RegRoot/IRPC MSTI regional root/internal path cost.
MSTI RootPortId MSTI root port ID.
MSTI Root Type MSTI root type, primary root or secondary root.
Master Bridge MSTI root bridge ID.
Cost to Master Path cost from the MSTI to the master bridge.