R3303-HP HSR6800 Routers Layer 2 - LAN Switching Command Reference

1
MAC address table configuration commands
The MAC address table can contain only Layer 2 Ethernet ports and Layer 2 aggregate interfaces.
This document covers only the configuration of unicast MAC address table entries, including static,
dynamic, and destination blackhole MAC address table entries. For more information about configuring
static multicast MAC address table entries, see IP Multicast Configuration Guide.
The MAC address table configuration commands are available on only SAP modules that are operating
in bridge mode.
display mac-address
Use display mac-address to display information about the MAC address table.
Syntax
display mac-address [ mac-address [ vlan vlan-id ] | [ [ dynamic | static ] [ interface interface-type
interface-number ] | blackhole ] [ vlan vlan-id ] [ count ] ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
blackhole: Displays destination blackhole MAC address entries.
vlan vlan-id: Displays MAC address entries of the specified VLAN. The value range for the vlan-id
argument is 1 to 4094.
count: Displays the number of MAC address entries specified by related parameters in the command.
When this keyword is used, the command displays only the number of specified MAC address entries,
rather than related information about these MAC address entries.
mac-address: Displays MAC address entries of a specified MAC address, in the format of H-H-H.
dynamic: Displays dynamic MAC address entries, which can be aged.
static: Displays static MAC address entries, which do not age.
interface interface-type interface-number: Displays the MAC address learning status of the specified
interface. interface-type interface-number specifies an interface by its type and number.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Fundamentals Configuration Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.