R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

125
Figure 45 Network diagram
Configuration procedure
# (Optional.) Configure the voice VLAN to operate in security mode. A voice VLAN operates in security
mode by default.
<RouterA> system-view
[RouterA] voice vlan security enable
# Add a recognizable OUI address 0011-2200-0000.
[RouterA] voice vlan mac-address 0011-2200-0000 mask ffff-ff00-0000 description test
# Create VLAN 2.
[RouterA] vlan 2
[RouterA-vlan2] quit
# Configure GigabitEthernet 4/0/1 to operate in manual voice VLAN assignment mode.
[RouterA] interface GigabitEthernet 4/0/1
[RouterA-GigabitEthernet4/0/1] undo voice vlan mode auto
# Configure GigabitEthernet 4/0/1 as a hybrid port.
[RouterA-GigabitEthernet4/0/1] port link-type hybrid
# Configure the voice VLAN (VLAN 2) as the PVID of GigabitEthernet 4/0/1, and configure
GigabitEthernet 4/0/1 to permit the voice traffic of VLAN 2 to pass through untagged.
[RouterA-GigabitEthernet4/0/1] port hybrid pvid vlan 2
[RouterA-GigabitEthernet4/0/1] port hybrid vlan 2 untagged
# Enable voice VLAN on GigabitEthernet 4/0/1.
[RouterA-GigabitEthernet4/0/1] voice vlan 2 enable
Verifying the configuration
# Display OUI addresses, OUI address masks, and description strings.
<RouterA> display voice vlan oui
Oui Address Mask Description
0001-e300-0000 ffff-ff00-0000 Siemens phone
0003-6b00-0000 ffff-ff00-0000 Cisco phone
0004-0d00-0000 ffff-ff00-0000 Avaya phone
0011-2200-0000 ffff-ff00-0000 test
00d0-1e00-0000 ffff-ff00-0000 Pingtel phone
0060-b900-0000 ffff-ff00-0000 Philips/NEC phone
00e0-7500-0000 ffff-ff00-0000 Polycom phone
00e0-bb00-0000 ffff-ff00-0000 3com phone