R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

3
Ste
p
Command Remarks
2. Configure MAC Information
mode.
mac-address information mode
{ syslog | trap }
Optional.
The default setting is trap.
Configuring the interval for sending syslog or trap
messages
To prevent syslog or trap messages from being sent too frequently, change the interval for sending syslog
or trap messages.
To set the interval for sending syslog or trap messages:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Set the interval for sending
syslog or trap messages.
mac-address information interval
interval-time
The default setting is one second.
Configuring the MAC Information queue length
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Configure the MAC
Information queue length.
mac-address information
queue-length value
The default setting is 50.
MAC Information configuration example
Network requirements
Enable MAC Information on GigabitEthernet 4/0/1 on Router in Figure 2 to send MAC address
changes in syslog messages to Host B.