R3303-HP HSR6800 Routers Layer 2 - LAN Switching Configuration Guide

181
Ste
p
Command Remarks
5. Associate the class with the
behavior to map the CVLAN
to the SVLAN.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
CVLAN-to-SVLAN mappings.
Configuring a downlink policy
To configure a downlink policy to map SVLANs back to CVLANs:
Ste
p
Command Remarks
1. Enter system view.
system-view
N/A
2. Configure one class for an
SVLAN.
a. Create a class and enter
class view:
traffic classifier tcl-name
[ operator { and | or } ]
b. Configure an SVLAN as the
match criterion:
if-match service-vlan-id
vlan-id
c. Return to system view:
quit
Repeat this step to configure one
class for each SVLAN.
3. Configure one behavior for a
CVLAN.
a. Create a traffic behavior and
enter traffic behavior view:
traffic behavior
behavior-name
b. Configure a CVLAN marking
action:
remark customer-vlan-id
vlan-id
c. Return to system view:
quit
Repeat this step to configure one
behavior for each CVLAN.
4. Create a QoS policy and
enter QoS policy view.
qos policy policy-name N/A
5. Associate the class with the
behavior to map the SVLAN
to the CVLAN.
classifier tcl-name behavior
behavior-name
Repeat this step to create other
CVLAN-to-SVLAN mappings.
Configuring the customer-side port
Ste
p
Command Remarks
1. Enter system view.
system-view N/A